Smok Pen – How exactly to Change the Coil and Change the Flavour
The Smok Pen is quite the interesting new electronic writing device. It is a pen which you can use to write on paper and also draw on with a pen or your finger. Nonetheless it does so much more. It is possible to control its temperature, and you also are able to use it to spray an elixir of e-liquid. This short article will show you how exactly to change your Smok Pen into an amazing vaporizer.
Your body of the Smok Pen is manufactured out of a durable stainless. That is why is it so nice and sturdy. However, your body of the vaporizer is covered in a fabric material that is not heat sensitive. So it is perfect for anyone that might be allergic to heat. It also works great if you work with it on a cold day. If you work with it outside for extended periods of time, then you should consider obtaining a model which has a built-in compressor.
The top of the Smok Pen is constructed out of black silicone material. Once you place the pen onto its heating element, it heats up the outer skin of the silicone which in turn causes it to expand. When it does that, a small reservoir is manufactured inside the pen’s body. When you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you would like to show your Smok Pen into a vaporizer, then you have to remove the metallic plate Novo 2 within the coil. On some types of Smok Pens, the plate covering the coil is located between the tank and the body. Other models could have the plate on the bottom. If you have an authentic Smok Pen, then removing the plate will not be easy at all. Many people have reported that they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
Assuming you have a genuine Smok Pen, you then should go ahead and take off the metal plate covering the coil. This is due to the coil will be connected to a little metal sub-ohm tank. If you don’t remove the plate, then the e-liquids which are stored within it will commence to heat up. At these times, the e-liquids may turn into vapor instead of turning out to be liquid, and you also risk getting burned.
When you have removed the metallic cover, then you can access the two screws which are holding down the body of one’s Smok Pen. Carefully take away the screws, and then carefully remove the metal sub-ohm tank from the pen. It is important that you place your hands under the Smok Pen, since it is incredibly hot. Many papers have reported that they burned their hand when they were trying to unscrew the tank. When you have placed your hands under the pen, then start the battery and put it in the “fire” mode. It is important that you do not turn on the pen as the battery is in the “fire” mode, because the battery may start to obtain hot.
After that, carefully pull the pen’s head from the coil. You will then need to remove the entire coil from the bottom of the pen, which will create a tight space where you could replace the coil. Carefully insert the new coil into the space. Make certain you follow all of the instructions, and that you align the brand new coil in the same manner as the old one was aligned. You’ll then start the pen and apply the airflow control switch to set the airflow. If you follow these instructions carefully, then you will not have a problem together with your new airflow device.
Once you have finished replacing the coil, you will need to reconnect the battery to the electrical circuit board. Your smok vaporizer will now prepare yourself again to use, and when you love it, you will definitely enjoy the new airflow, and the wonderful flavours that it brings. If you feel that you want to purchase your own flavours, you should find out which flavours can be purchased in the Smok Pen range of e-liquids.